Glustitch™

You are on the

site

GluStitch Incorporated manufacturers and distributes high quality cyanoacrylates for the medical, dental and veterinary markets. In the United States GluStitch® has FDA approval to market four products. Intended uses vary from jurisdiction to jurisdiction and GluStitch® will not be held responsible for off label use on any product.

	GluSeal® 510K# K030574
	GluSeal® is a liquid bandage intended to cover minor cuts, scrapes, burns, and minor irritations of the skin and help protect them from infection. GluSeal® is intended for professional use, and is available only as a single use clip and use product. For distributors in the United States click on the "Dealer Enquiries" tab

	PeriAcryl® 510K# K974097 - - Dental

	PeriAcryl® is indicated for us as a dental cement for bonding dental materials such as crowns, caps and pins. PeriAcryl® is a fast drying butyl cyanoacrylate with a very low viscosity. Availability: - Unit if Use Kit: 12 x 0.2 mL. adhesive. - Minikit: 1 x 2 mL. adhesive, administration tray, 20 pipettes. - Multiuse Kit (Reg): 1 x 5 mL adhesive, 50 pipettes. All kits are available in dark violet. Light violet or clear is available by special request.
	» Files available for viewing & printing: Product Monograph Product Options Material Safety Data Sheet

	Tips on using PeriAcryl®
	In order to achieve greater viscosity and a smoother finish, it is possible to mix PeriAcryl® (butyl cyanoacrylate), and GluSite® (octyl cyanoacrylate) together. For example, to create a 70% octyl 30% butyl formulation. Use the tray, or any other receptacle and a pipette. Compress the bulb end of the pipette, and while compressing, position the distil tip directly into the opening of the purple material. With the bottle at a slight downward angle, release the compression allowing a small amount of the violet butyl to enter the pipette. Drop three drops into one of the wells/receptacle. Then, using a second pipette, do the same with the clear GluSite®. This time drop seven drops into the same well. To mix the two, use the same pipette, insert the tip in the well and squeeze and release the bulb end several times. Draw up the mixed formulation for your procedure.

	GluShield® 510K# K030574
	Go to the GluShield® website: www.glushield.com

	GluSite® 510K# K013446 -- Dental

	GluSite® is indicated for use as dental cement for bonding dental materials such as crowns, caps, and pins or temporary attaching a fiber to a the surface of the tooth in a procedure to treat periodontal disease. GluSite® is an octyl cyanoacrylate which dries slowly (approximately 30 seconds when spread thinly), and has a higher viscosity than butyl cyanoacrylate.